Fujitsu M2488 manual Log Sense Page 31h, Track Error Statistics, Error Statistics by Track

TAPE UNIT SCSI COMMANDS							M2488 PRODUCT GUIDE
	Table 4-39. Log Sense Page 0Ch, Sequential-Access Device Page (Continued)
				BITS					DEFAULT
BYTES	7	6	5	4	3	2	1	0	VALUE
52-	MSB			Parameter Code					0100h
53								LSB
54	DU	DS=1	TSD=1	ETC=0	TMC=0		Reserved	LP=0	E0h or 60h
55				Parameter Length					08h
56	Cln Req *	Reserved	Reserved	Reserved	Reserved	Reserved	Reserved	Reserved	00h
57-	MSB			Reserved					00h
63								LSB

*Note: The Cln Req bit of 1 indicates cleaning is required and a subsequent cleaning cycle has not been completed. The cleaning required parameter persists across hard resets and power cycles. This bit is reported as 0 following a successful cleaning cycle.

Table 4-40. Log Sense Page 31h, Track Error Statistics

				BITS						DEFAULT
BYTES	7	6	5	4	3		2	1	0	VALUE
0	Reserved				Page Code					31h
1				Reserved						00h
2-	MSB			Page Length						00D8h
3									LSB
ERROR STATISTICS BY TRACK
4-	MSB			Parameter Code						9001h
5									LSB
6	DU	DS=1	TSD=1	ETC=0		TMC=0		0	LP=0	E0h or 60h
7				Parameter Length						08h
8-	MSB	Number of ECC correctable read/write errors detected on track 1
15									LSB
16-	MSB			Parameter Code						9002h
17									LSB
18	DU	DS=1	TSD=1	ETC=0		TMC=0		0	LP=0	E0h or 60h
19				Parameter Length						08h
20-	MSB	Number of ECC correctable read/write errors detected on track 2
27									LSB
28-	MSB			Parameter Code						9003h
29									LSB
30	DU	DS=1	TSD=1	ETC=0		TMC=0		0	LP=0	E0h or 60h

4-44 CG00000-011503 REV. A April 1997