Fujitsu M2488 manual Chronous event notification

TAPE UNIT PARAMETERS M2488 PRODUCT GUIDE

Table 5-11. Page 0Ah - Common Device-type Control Parameters Field Description (Continued)

BYTE	BIT	VALUE	DESCRIPTION
4	0-2	0	The RAENP, UAAENP, and EAENP bits enable specific events to be reported via
			the asynchronous event notification protocol. This product does not support asyn-
			chronous event notification.
			When all three bits are zero, the target shall not create asynchronous event notifica-
			tions.
			The default values reported for these fields on a MODE SENSE command are zeros
			and not changeable.
4	7	0	When set to zero, the Enable Extended Contingent Allegiance (EECA) bit indicates
			that the extension of the contingent allegiance condition is disabled.
			The default value reported for this field on a MODE SENSE command is zero and
			not changeable.
6-7		0	The Ready AEN Holdoff Period field specifies the minimum time in microseconds
			after the target starts its initialization sequence that it shall delay before attempting
			to issue an asynchronous event notification.
			The default value reported for this field on a MODE SENSE command is zero and
			not changeable.

5-10 CG00000-011503 REV. A April 1997