Connection Diagram
Check the type and orientation of the DV or USB terminal and make sure you connect the DV cable or USB cable properly.
Using a USB cable
USB terminal
Using an IEEE1394 (DV) cable
IEEE1394 (DV) terminal |
Commercially available DV cable |
Operation may not work correctly depending on the software and the specifications/settings of your computer.
If the computer freezes while you have connected the camcorder, disconnect and reconnect the DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them.
Before connecting the camcorder to the computer using a DV cable make sure that camcorder and computer are not connected with a USB cable, and that no other 1394 device is connected to the computer.
Make sure that camcorder and computer are not connected with a DV cable before connecting the camcorder to the computer using the USB cable. Otherwise, the computer may not operate properly.
Depending on the video editing software you use, you may need to set the power switch of the camcorder to a mode other than PLAY. Refer also to the instruction manual of the editing software.
We recommend powering the camcorder from a household power source while it is connected to the computer.
Refer also to the instruction manual of the computer.
The programs ZoomBrowser EX and Image Browser included with the supplied CD are intended for use only with images recorded on the memory card.
120
