Using the NETWORK Mode (DV Messenger Version 2)
With the Windows XP dedicated DV Network Software (DV Messenger), you can operate your camcorder from the computer, perform videoconferences using the camcorder or remotely access the camcorder at home using the Internet.
Download the DV Messenger and the DV Network Software Instruction Manual from the following homepage. Refer to the DV Network Software Instruction Manual for details.
www.canondv.com
www.canon.ca
E
Power switch
Lock button
Preparation for Using DV Messenger
1.Start the computer and install DV Messenger.
If you wish to connect the camcorder using a USB cable, you also need to install the Canon USB Video Driver (The required USB Video Driver will be downloaded together with the DV Messenger).
2.Connect the power adapter to the camcorder.
3.Press the lock button and turn the POWER switch to NETWORK.
4.Connect the camcorder to the computer using a USB cable or DV cable.
“NETWORK MODE” appears on the camcorder screen.
5.Start DV Messenger.
Make sure that camcorder and computer are not connected with a DV cable before connecting the camcorder to the computer using the USB cable. Otherwise, the computer may not operate properly.
In NETWORK mode, only the following functions can be used from the camcorder:
-When the DV Messenger [CAMERA] control panel is displayed: Zoom and focus
-When the DV Messenger [VCR] control panel is displayed: Volume adjustment of the
Only when the DV Messenger [CAMERA] control panel is displayed the Zoom can be operated from the wireless controller. All other operations cannot be performed using the wireless controller.
Connecting to a PC
125
