Canon 600 instruction manual Direct Print Related Messages, Paper Error

	Message	Explanation
CARD FULL		No remaining capacity on the memory card. Replace with another	–
		card or erase images.
NAMING ERROR		The folder and image numbers have reached their maximum	69
		value.
UNIDENTIFIABLE		Image is not recorded with JPEG compression, or with a	–
IMAGE		compression not compatible with the camcorder, or the image file
		is corrupted.
	PRINT ORDER	You attempted to set more than 998 still images in the print order.	–
ERROR
	TRANSFER ORDER	You attempted to set more than 998 transfer orders.	124
ERROR
CANNOT TRANSFER!		You attempted to transfer a movie file as wallpaper.	122
THIS IMAGE CANNOT		Some analog images cannot be recorded on the memory card	–
BE RECORDED		depending on the signal.
NOW CREATING START-		The start-up image is being made.	–
UP IMAGE
THIS IMAGE CANNOT		You attempted to use an image recorded with another camcorder,	75
BE USED AS START-UP		recorded with a compression not compatible with this camcorder,
IMAGE		or that has been edited on a computer.
TOO MANY STILL		Disconnect the USB cable, decrease the number of still images on	–
IMAGES DISCONNECT		the memory card to less than 1800. If a dialog appeared on the
USB CABLE		computer screen, close it. Reconnect the USB cable.

E

Direct Print Related Messages

Following messages may appear on the camcorder screen. Refer also to the printer manual for remedies corresponding to the error messages.

Canon PIXMA/SELPHY DS printer:

Make sure to refer to the printer’s manual in the following cases:

-When the error indicator on the printer flashes.

-Printers equipped with an operation panel and printers that can be connected to a TV: When an error number or error message is displayed on the panel or TV monitor.

If the error persists, consult your dealer or a Canon Service Center listed in the Contact List provided with the printer or the printer’s manual.

Message	Explanation
PAPER ERROR	There is a problem with the paper.
	Wrong paper size is inserted, the ink cannot be used with the selected
	paper or paper output tray is open.
NO PAPER	Paper is not correctly inserted or there is no paper. If the printer is
	equipped with a photo paper cassette, specify the paper feed location
	using the Paper Feed switch.
PAPER JAM	The paper jammed during printing. Select [STOP] to cancel printing.
	After removing the paper, set some paper again and press the resume
	button on the printer.
PAPER HAS BEEN	Paper size has been changed between print setting and start of printing.
CHANGED
MEDIA TYPE ERROR	You attempted to use a paper size/type that is not supported by the
	printer.
INCOMPATIBLE PAPER	You attempted to print on paper that cannot be used with the camcorder.
SIZE
INK ERROR	There is a problem with the ink.

Trouble?

131