Static IP: Select this option to assign the IP address for the camera directly. You can use IPFinder to obtain the related setting values.
IP | Enter the IP address of the camera. The default |
| setting is 192.168.10.30. |
|
|
Subnet Mask | Enter the Subnet Mask of the camera. The |
| default setting is 255.255.255.0. |
|
|
Default | Enter the Default Gateway of the camera. The |
Gateway | default setting is 192.168.10.1. |
|
|
Primary/ | DNS (Domain Name System) translates domain |
Secondary DNS | names into IP addresses. Enter the Primary DNS |
| and Secondary DNS that are provided by ISP. |
|
|
PPPoE: Select this option when you use a direct connection via the ADSL modem. You should have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP address from the ISP as starting up.
NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.
DDNS Setting: With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet IP address. To set up the DDNS:
1.Select the Enable option to enable this feature.
2.Select the Provider from the
3.Enter the required information in the Host Name, User Name, and Password boxes.
NOTE You have to sign up for DDNS service with the service provider before configuring this feature. Please refer to Chapter 6 for detail information.
UPnP: The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the
- 36 -