Factory Reset: Click Reset to restore all factory default settings for the camera. You can also do the physical reset by press the reset button on the camera. Remove the front cover of the camera and press the reset button as indicates below.
System Reboot: Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained after rebooting.
Configuration: You can save your camera configuration as a backup file on your computer. Whenever you want to resume the original settings, you can restore them by retrieving the backup file.
Backup: Click Get the backup file to save the current configuration of the camera.
Restore: Click Browse to locate the backup file and then click Restore.
Update Firmware: You can upgrade the firmware for your camera once you obtained a latest version of firmware.
Current Firmware Version: This item displays the current firmware version.
Select the firmware: Click Browse to locate the backup file and then click Update.
NOTE Make sure to keep the camera connected to the power source during the process of upgrading firmware. Otherwise, the camera might be damaged because of failure of upgrading firmware.
- 65 -
