Alpine CDE-HD149BT Indication for Flash Memory, Indication for iPod Mode, BLUETOOTH mode, 48-EN

• Mechanism error.

1Press the button and eject the CD.

If not ejecting, consult your Alpine dealer.

2When the error indication remains after ejecting, press the  button again.

If the error indication still does not turn off after pressing the  button for a few times, consult your Alpine dealer.

•When “Error” is displayed:

If the disc cannot be ejected by pressing , press the RESET switch (refer to “Initial System Start-Up” on page 10) and press  again. If the disc still cannot be ejected, consult your Alpine dealer.

Protect

•A copy-protected WMA file was played back.

– You can only play back non-copy-protected files.

Unsupported

•A sampling rate/bit rate not supported by the unit is used.

– Use a sampling rate/bit rate that is supported by the unit.

Indication for Flash Memory

Error-01

•Database error or decoder error.

– You can solve the problem by switching the source.

Unsupported

•A sampling rate/bit rate not supported by the unit is used.

– Use a sampling rate/bit rate that is supported by the unit.

Protect

•A copy-protected WMA file was played back.

– You can only play back non-copy-protected files.

Indication for iPod Mode

•The iPod/iPhone is not connected.

–Make sure the iPod/iPhone is correctly connected (refer to “Connections” on page 54).

Make sure the cable is not bent excessively.

No Song

•There are no songs in the iPod/iPhone.

– Download songs to the iPod/iPhone and connect to this unit.

Error-01

•Communication error or boot error, etc.

–You can solve the problem by reconnecting the iPod/iPhone or changing source.

Error-02

•Communication error or boot error, etc.

–You can solve the problem by reconnecting the Flash Memory or format the USB Memory.

•Abnormal current is run to the USB connector device.

–You can solve the problem by switching the source.

USB Device Error

•A USB device that is not supported by the unit is connected.

– Connect a USB device that is supported by the unit.

Error-02

•The iPod/iPhone version is too low.

– Update the iPod/iPhone version.

Error-03

•The iPod/iPhone is not verified.

– You can solve the problem by reconnecting the iPod/iPhone.

BLUETOOTH mode

•The BLUETOOTH device is not connected.

– Connect the BLUETOOTH device.

•A Flash Memory is not connected.

–Make sure the Flash Memory device is correctly connected and the cable is not excessively bent.

SiriusXM Advisory Messages

The following messages may be displayed while operating the unit in SiriusXM mode.

No Song

•No song (file) is stored in the Flash Memory.

– Connect the Flash Memory device after storing songs (files).

48-EN

Check Tuner

•The SiriusXM tuner is disconnected or the unit is having trouble communicating with Tuner.

–Connect the Tuner or check the Tuner connection to the back of the unit.