Turning Subwoofer ON/OFF
When the subwoofer is on, you can adjust the subwoofer output level (refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” on page 16).
Setting item: Subwoofer
Setting contents:
OFF / ON (Initial setting)
OFF:
No subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 54).
ON:
The subwoofer signal is output from the Subwoofer RCA Connectors (refer to “Connections” on page 54).
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or Subwoofer Reverse (180°). To adjust the level, turn the Rotary encoder.
Setting item: Subwoofer Phase
Setting contents:
0° (Initial setting) / 180°
Setting the Subwoofer System
When the subwoofer is on, you can select either System 1 or System 2 for the desired subwoofer effect.
OFF:
Amplifier
Amplifier
ON:
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Front
Left
Front
Right
Rear
Left
Rear
Right
Speakers
Front
Right
Rear
Right
Rear
Left
Front
Left
Setting item: Subwoofer System
Setting contents:
System 1/ System 2 (Initial setting)
System 1:
Subwoofer level changes according to the main volume setting.
System 2:
Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible.
External Device
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the
Setting item: Power IC
Setting contents:
OFF / ON (Initial setting)
OFF :
Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit’s internal amplifier is turned OFF and can not drive speakers.
ON :
The speakers are driven by the
Note
• No sound is produced by the system when the Power IC is set to OFF.
Setting the Media Xpander mode (MX Setup)
MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The CD and iPod, etc. will be able to reproduce the music clearly even in cars with a lot of road noise.
Setting item: MX Setup
1Turn the Rotary encoder to select the source to which you want to apply Media Xpander, and then press ENTER.
Analog Tuner HD1 HD2 HD3&Other SiriusXM CD CMPM* USB iPod BT Audio Pandora AUX
*Be applied for MP3/WMA/AAC files in disc.
2Turn the Rotary encoder to select the Media Xpander level, and then press ENTER.
OFF Level 1 Level 2 Level 3 Customize
Customizing the Media Xpander setting
If Customize is selected in step 2, you can modify the Media Xpander to suit your personal preference.
3Turn the Rotary encoder to select the Band, and then press ENTER. Band1 (Low frequencies) Band3 (High frequencies)
Band1 (Bass) Band2 (Mid) Band3 (High)
4Turn the Rotary encoder to adjust the level, and then press ENTER.
LEVEL: 0 ~ 8