Audio Setup
You can flexibly customize the unit to suit your own preference and usage. From the AUDIO SETUP menu, Audio Setting can be modified.
Use steps 1 to 5 to select the category you wish to modify. For details on how to change each setting, see the following sections below.
1Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode.
2Turn the Rotary encoder to select Audio, and then press
ENTER.
Audio*1 General Display Tuner SiriusXM*2 iPod&USB Application Bluetooth Audio
*1 Adjustment cannot be performed during a call.
*2 Displayed only when a SiriusXM Tuner is connected.
3Turn the Rotary encoder to select the desired sound setting menu, and then press ENTER.
Factory’s EQ*3/*4 Parametric EQ*3/*5 VOL LV ADJ Subwoofer Subwoofer Phase*6 Subwoofer System*6 Power IC MX Setup*3 TCR Parameter*3 T.Correction*3 Spatial*3
*3 Adjustment cannot be performed when DEFEAT is set to ON. *4 Any changes made to either Factory’s EQ or Parametric EQ are
reflected in the others’ settings.
*5 In step 3, nine sound adjustment items can be selected in Parametric EQ mode. Turn the Rotary encoder to select the
desired item, and then press ENTER to continue to step 4.
*6 These functions are inoperable when Subwoofer is set to OFF.
4Turn the Rotary encoder to change the setting, and then press ENTER.
5Press and hold AUDIO/SETUP for at least 2 seconds to return to normal mode.
Notes
•Pressing r returns to the previous Sound menu mode.
•If no operation is performed for 60 seconds, Sound menu mode is canceled.
Equalizer Presets (Factory’s EQ)
10 typical equalizer settings are preset at the factory for a variety of musical source material. User settings are created in the Parametric EQ mode.
User Flat (Initial setting)Pops Rock News Jazz&Blues Electrical Dance Hip Hop&Rap Easy Listening
Country Classical
Note
• The
Adjusting the Parametric Equalizer Curve (Parametric EQ)
You can modify the Equalizer settings to create a response curve more appealing to your personal taste.
1After selecting Parametric EQ from the Audio Setup mode, turn the Rotary encoder to select the desired band, then press ENTER.
2Turn the Rotary encoder to select the desired frequency within the selected band, then press ENTER.
3Repeat step 2 to adjust the Bandwidth and Level within the selected band.
Adjusting the Band
Setting contents:
Band1/Band2/Band3/Band4/Band5/Band6/Band7/Band8/
Band9
Adjusting the Frequency (Freq.)
Adjustable frequency bands: 20 Hz to 20 kHz
Band1: | 20 Hz ~ 100 Hz (63 Hz) |
Band2: | 63 Hz ~ 315 Hz (125 Hz) |
Band3: | 125 Hz ~ 500Hz (250 Hz) |
Band4: | 250 Hz ~ 1 kHz (500 Hz) |
Band5: | 500 Hz ~ 2 kHz (1 kHz) |
Band6: | 1 kHz ~ 4 kHz (2 kHz) |
Band7: | 2 kHz ~ 7.2 kHz (4 kHz) |
Band8: | 5.8 kHz ~ 12 kHz (8 kHz) |
Band9: | 9 kHz ~ 20 kHz (16 kHz) |
Setting the Bandwidth (Q)
Setting contents:
3.0 (Initial setting) / 4.0 / 5.0
Notes
•Settings exceeding the frequency of adjacent bands are not available.
•While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers.
•When the Parametric EQ is adjusted, the adjustment for Factory’s EQ becomes ineffective.
•The Parametric EQ setting can be configured when Defeat is OFF.
Adjusting the Level
Setting contents:
−7 to +7 (Initial setting: 0)
Note
•Band2 and Band8 are the same as the Bass and Treble controls. Their Level adjustment can also be controlled by pressing AUDIO and selecting Bass Level or Treble Level. Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” on page 16.
•Settings exceeding the frequency of adjacent bands are not available.
•While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers.
•The Parametric EQ is used to create the Factory’s EQ settings.
Setting the Source Volume Level
The output level of each source is individually adjustable. For example, if the Tuner level sounds lower than Disc, its output can be adjusted without affecting the other sources.
Setting item: VOL LV ADJ
Further setting items: Tuner / SiriusXM / Disc / USB / iPod / BT Audio / Pandora / AUX
Setting contents: −14 dB ~ +14 dB
