![](/images/new-backgrounds/1110383/110383221x1.webp)
|
|
|
execute |
restore
Use this command to restore the
Syntax
execute restore config <filename> <tftp_ipv4> execute restore config <filename> <tftp_ipv4> execute restore image tftp <filename> <tftp_ipv4>
Variables | Description |
|
|
config <filename> <tftp_ipv4> | Restore the system configuration from a file on a TFTP server. |
| The new configuration replaces the existing configuration. |
Restore the system configuration from a file on a TFTP server | |
<tftp_ipv4> | that was saved using the execute backup |
command. The new configuration replaces the existing | |
| configuration. |
|
|
image tftp <filename> | Upload a firmware image from a TFTP server to the |
<tftp_ipv4> | |
firmware. | |
|
|
Example
This example shows how to upload a configuration file from a TFTP server and restart the system with this configuration. The name of the configuration file on the TFTP server is backupconfig. The IP address of the TFTP server is 192.168.1.23.
execute restore config backupconfig 192.168.1.23
Related topics
•execute backup
| |
111 |