
Step 1: Preparing the Power Supply
The camcorder can be powered by a battery pack or connected to a household power source. Charge the battery pack before use.
E
Attaching the Battery Pack |
|
|
1. Turn the POWER switch to OFF. |
|
|
2. Attach the battery pack to the |
|
|
camcorder. |
|
|
• Remove the terminal cover of the |
|
|
battery pack. |
|
|
• Slide in the connector end of the battery |
|
|
in the direction of the arrow and press it |
|
|
gently until it clicks. |
|
|
To remove the battery pack: |
|
|
Hold the BATT. RELEASE button |
| Preparation |
pressed down and pull out the |
| |
|
| |
battery from the ridge on its bottom | BATT. RELEASE |
|
part. |
| |
button |
| |
|
| |
Charging the Battery Pack |
|
|
1. Connect the power cord to the |
| Charge |
adapter. |
| indicator |
2. Plug the power cord into a power outlet.
3. Open the terminal cover and connect the power adapter to the camcorder’s DC IN terminal.
The charge indicator starts flashing. It glows steadily when charging is complete.
To remove the power adapter:
1.Disconnect the power adapter from the camcorder.
2.Unplug the power cord from the power outlet.
3.Disconnect the power cord from the adapter.
17