Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

Speaker

SET dial

1.Set the camcorder to PLAY(VCR)• or PLAY(VCR)• mode.

2.Turn the SET dial up to increase the volume, and

down to lower the volume during playback.

• A volume bar appears for 2 seconds.

• You can turn off the volume completely by turning the SET dial down until “OFF ” appears. Turn the SET dial up to increase the volume again.

The speaker does not sound when headphones are connected to the camcorder.

You can also use headphones to check the sound while recording. Use the MENU button to adjust the volume ( 67).

38

Page 38
Image 38
Canon 600 instruction manual Adjusting the Volume