Canon 600 instruction manual Audio Setup, 12bit

REC MODE: Switches the recording mode. The long play mode extends the tape usage by 1.5 times.

Tapes recorded in LP mode cannot be used for audio dubbing.

Depending on the nature and usage condition of the tape, picture and sound recorded in LP mode may be distorted. We recommend using the SP mode for important recordings.

If you record in both SP and LP modes on the same tape, the playback picture may become distorted and the time code may not be written correctly.

If you play back a tape that has been recorded in LP mode with another digital device on this camcorder, or vice versa, picture and sound may become distorted.

VIDEO INPUT: When recording from an analog line-in ( 98) or when converting analog signals to digital ( 102), select the appropriate input signal corresponding to the output of the analog device connected to the camcorder.

[VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the audio/ video terminal.

[S VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the S-video terminal.

E

AUDIO SETUP

Menu Items		Setting Options
OUTPUT CH	L/R,	L/L,	R/R		-
AUDIO DUB.	AUDIO IN,		MIC. IN		104
WIND SCREEN	AUTO,	OFF			73
MIC ATT	ON,	OFF			72
MIC LEVEL	AUTO,	MANUAL			71
12bit AUDIO	STEREO1,		STEREO2,	MIX/	105
	FIXED,	MIX/VARI.
MIX BALANCE					105
AUDIO MODE	16bit,	12bit			-
PHONES VOL.					-

OUTPUT CH: Switches the output channels when playing back a tape with audio recorded on two channels.

[L/R]: Stereo: L+R channels, Bilingual: Main+Sub.

[L/L]: Stereo: L channel, Bilingual: Main.

[R/R]: Stereo: R channel, Bilingual: Sub.

AUDIO MODE: Switches the audio recording mode.

[16bit] records in high sound quality.

Select [12bit] if you plan to dub audio later.

PHONES VOL.: Adjusts the headphones volume during recording.

Turn the SET dial up or down to adjust the volume.

Changing the Settings	Advanced Functions
(2)

67