Desa PD15EA Cleaning, Troubleshooting, Wiring Diagram, During Season Care, After Season Care

CLEANING

DURING SEASON CARE

Always unplug the product before moving or cleaning.

1.Do not disassemble. Carefully wipe the exte- rior of unit with a soft, damp cloth.

2.After cleaning, be sure to completely dry the unit with a cloth or towel.

AFTER SEASON CARE

Store product indoors in a dry location. No main- tenance is required for this product.

TROUBLESHOOTING

CAUTION: Risk of electric shock.Donotopen.Nouserservi- cable parts inside. Take heater to an authorized service center.

6.Lightly push red button to reset switch.

7.Replace removed plug in hole. Perform a trial operation.

8.If repeated resetting of the thermal limit switch is required, have the product serviced by an authorized service center.

Push Rod

Access to

Thermal

Limit Switch

Figure 4 - Resetting Thermal Limit Switch

If your product fails to operate:

1. Make sure the electrical outlet GFCI or circuit

WIRING DIAGRAM

	breaker and extension cord is working.
2.	Check for operation of tip switch. The ON/
	OFF switch light can be on but the tip switch
	OFF. Move product until a “click” is heard.
	To prevent damage of tip switch post, do not
	slide product.
3.	Look for obstructions around fan. If you find
	an obstruction, turn the product OFF and
	UNPLUG THE PRODUCT. Have the product
	serviced by a qualified individual.
4.	Check for tripped thermal protector. Motor
	and heating element do not operate. Wait 10
	minutes for product to cool. Push reset button.
	See Thermal Limit Switch below.

POWER PLUG

120V 60Hz

	GREEN
WHITE	BLACK
	ON/OFF
	SWITCH
	N L
	BLACK
	N L

	MANUAL RESET
TIP SWITCH	THERMAL LIMIT
	SWITCH
	BLACK

THERMAL LIMIT SWITCH

If product is used in temperatures below 75° F (28.9° C), the limit switch should not require resetting unless there is a malfunction. If a mal- function does occur, have the product serviced by an authorized service center.

Resetting Thermal Limit Switch

1.Unplug product.

2.Allow product to cool.

3.Turn product upside down.

4.Remove plug on bottom.

5.Insert provided plastic push rod through hole and guide to small red button on thermal limit switch (see Figure 4). A flashlight will improve visability.

WHITE

HEATING

WHITE ELEMENT BLACK

MOTOR

GREEN

BLACK

113612-01B www.desatech.com 5