Fujitsu M2488 manual Logical unit is not ready magazine is not present

M2488 PRODUCT GUIDE MEDIA CHANGER COMMANDS

6-2.6.3 TEST UNIT READY Sense Keys

One of the following sense keys may be returned if a CHECK CONDITION was indicated:

SENSE KEY	CONDITION		DESCRIPTION
2h	NOT READY	Logical unit is not ready (magazine is not present).
4h	HARDWARE ERROR	Medium-changer hardware is broken.
5h	ILLEGAL REQUEST	1. Reserved bit was found set in the CDB of the TEST UNIT
			READY command.
		2.	Flag bit was set and link bit was not set.
6h	UNIT ATTENTION	Indicates the TEST UNIT READY command was not performed
		due to one of the following:
		1.	The target has been reset.
		2.	The Mode parameters have been changed by another initiator.
		3.	The version of the microcode has been changed (microcode
			downloaded).

March 1997 CG00000-011503 REV. A 6-31