Fujitsu M2488 manual Bits Default Bytes Value Bytes Transferred from Initiator, TMC=0

M2488 PRODUCT GUIDE									TAPE UNIT SCSI COMMANDS
	Table 4-37. Log Sense Page 02h, Error Counter Page - Write (Continued)
					BITS						DEFAULT
BYTES	7	6		5	4	3		2	1	0	VALUE
BYTES TRANSFERRED FROM INITIATOR
52-	MSB				Parameter Code						9000h
53										LSB
54	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
55					Parameter Length						08h
56-	MSB			Total Bytes Transferred from Initiator
63										LSB
HOST WRITE DATA RETRANSMISSIONS REQUIRED FOR OTHER THAN SCSI INTERFACE ERRORS
64-	MSB				Parameter Code						9001h
65										LSB
66	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
67					Parameter Length						08h
68-	MSB	Total Host Write data transfer operations that had to be retried for other
		than SCSI interface errors (e.g., compression failures, excessive expan-
										LSB
75
					sion, etc.)
HOST WRITE BLOCKS RECOVERED BY USE OF INTERNAL RECOVERY BUFFER
76-	MSB				Parameter Code						9002h
77										LSB
78	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
79					Parameter Length						08h
80-87	MSB	Total Host Write Operations Recovered by use of internal recovery buffer
										LSB
TOTAL WRITE BLOCKS
88-	MSB				Parameter Code						9003h
89										LSB
90	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
91					Parameter Length						08h
92-	MSB		Total Blocks Written to tape (excluding tapemarks)
99										LSB
TOTAL TAPEMARKS WRITTEN
100-	MSB				Parameter Code						9004h
101										LSB
102	DU	DS=1		TSD=1	ETC=0		TMC=0		0	LP=0	E0h or 60h
103					Parameter Length						08h
104-	MSB			Total Tapemarks Written to Tape
111										LSB

April 1997 CG00000-011503 REV. A 4-39