Lexmark 762 manual Remove Cartridge and, <specified bin>

Message	What this message means	What you can do
Remove Cartridge and	The packing material has not been	Remove all packing material from inside
ITU Packaging	removed from the cartridges and the	the printer.
	image transfer unit belt.	See also: “Step 5: Installing Supplies” in
		the Setup Guide
Remove Paper	The specified output bin, or bins, is full.	Remove the stack of paper from the
<specified bin>		specified bin(s) to clear the message.
Resetting Active Bin	The printer is resetting to the active bin	Wait for the message to clear.
	in a linked set of bins.
Resetting Fuser Cnt	The printer is resetting the counter that	Wait for the message to clear.
Value	tracks wear on the fuser.
Resetting the Printer	The printer is resetting to the current	Wait for the message to clear.
	default settings. Any active print jobs	See also: Changing menu settings
	are canceled.
Restore Held Jobs.	Someone reset the printer or turned it	•	Press Go. All Print and Hold jobs on the
Go/Stop?	on, and the printer detects Print and	•	hard disk are restored to printer memory.
	Hold jobs stored on the hard disk.		Press Return or Stop. No Print and
			Hold jobs are restored to printer
			memory. The printer returns to the
			Ready state.
		See also: Holding a job in the printer
Restoring Factory	The printer is restoring the factory	Wait for the message to clear.
Defaults	default printer settings. When factory	See also: Restoring factory default
	default settings are restored:	settings
	• All downloaded resources (fonts,
	macros, symbol sets) in the printer
	memory are deleted.
	• All menu settings return to the
	factory default setting except:
	– The Display Language setting in
	the Setup Menu.
	– All settings in the Parallel Menu,
	Serial Menu, Network Menu,
	USB Menu, and Fax Menu.
Restoring Held Job	The printer is restoring held jobs from	• Wait for the message to clear.
xxx/yyy	the hard disk.	• Select the Abort Restore menu item in
	Note: xxx represents the number of		the Job Menu.
	the job being restored. yyy represents	See also: Holding a job in the printer
	the total number of jobs to be restored.
Restoring Held Jobs	The printer is restoring held jobs from	Wait for the message to clear.
	the hard disk.	See also: Holding a job in the printer
Serial <x>	A serial interface is the active	Wait for the message to clear.
	communication link.
Setup Required	• When you unpacked the printer, you	Remove all packing material from inside
Press Go	left a piece of packing material	the printer.
	inside.	After pressing Go, you may see the
		message, “Remove Cartridge and ITU
		Packaging.”
		See also: Remove Cartridge and ITU
		Packaging; “Step 5: Installing Supplies” in
		the Setup Guide.

83