Lexmark 762 manual Network <x>

Message	What this message means	What you can do
54 Network <x>	The printer cannot establish	• Press Go to clear the message and
Software Error	communications with an installed	continue printing. The job may not print
	network port.	correctly.
54 Std Network		• Program new firmware for the network
Software Error		interface by way of the parallel port.
		• Press Menu to open the Job Menu and
		reset the printer.
54 Std Par ENA	The printer has lost the connection to	• Make sure the cable connecting the ENA
Connection Lost	an external print server (also called an	and the printer is securely attached. Turn
	external network adapter or ENA).	the printer off and then on to reset the
54 Par <x> ENA		printer.
Connection Lost		• Press Go to clear the message. The
		printer erases any reference to the ENA
		and then resets.
55 Unsupported	An unsupported option card is installed	Turn off and unplug the printer. Remove the
Option in Slot <x>	in one of the ports or an unsupported	unsupported option. Plug in the printer and
	flash DIMM is installed in a memory	turn it on.
55 Unsupported Flash	slot.	See Removing memory and option
in Slot <x>		cards for help.
56 Serial Port <x>	Data has been sent to the printer	• Press Go to clear the message. The
Disabled	through a serial port, but the serial port	printer discards any data received
	is disabled.	through the serial port.
56 Standard Serial		• Make sure the Serial Buffer menu item in
Disabled		the Serial Menu is not set to Disabled.
		See also: Serial Buffer
56 Parallel Port <x>	Data has been sent to the printer	• Press Go to clear the message. The
Disabled	through a parallel port, but the parallel	printer discards any data received
	port is disabled.	through the parallel port.
56 Std Parallel Port		• Make sure the Parallel Buffer menu item
Disabled		in the Parallel Menu is not set to
		Disabled.
		See also: Parallel Buffer
56 USB Port <x>	Data has been sent to the printer	• Press Go to clear the message. The
Disabled	through a USB port, but the USB port	printer discards any data received
	is disabled.	through the USB port.
56 Standard USB Port		• Make sure the USB Buffer menu item in
Disabled		the USB Menu is not set to Disabled.
		See also: USB Buffer
58 Input Config Error	Either too many drawers with matching	Turn off and unplug the printer. Remove the
	trays are attached to the printer or the	additional drawers or reconfigure the
	input configuration is invalid. (For	offending option. Plug in the printer and
	example, a duplex unit is not installed	turn it on.
	directly underneath the printer, but	See also: Setup Guide
	under a tray instead.)
58 Output Config	Too many output options have been	Turn off and unplug the printer. Remove the
Error	attached to the printer.	additional output option(s). Plug in the
		printer and turn it on.
		See also: Setup Guide

88