Message | What this message means | What you can do | |
Held Jobs May Be | The printer memory is too full to | • Press Go to clear the message and | |
Lost | continue processing print jobs. | continue printing. The printer frees | |
|
| memory by deleting the oldest held job | |
|
| and continues deleting held jobs until | |
|
| there is enough printer memory to | |
|
| process the job. | |
|
| • Press Stop to clear the message without | |
|
| deleting any held jobs. The current job | |
|
| may not print correctly. | |
|
| • Press Menu to open the Job Menu and | |
|
| cancel the current job. | |
|
| • To avoid this error in the future: | |
|
| – Delete fonts, macros, and other data | |
|
| stored in printer memory. | |
|
| – Install more printer memory. | |
|
| Note: The messages 37 | |
|
| Insufficient Memory and Held | |
|
| Jobs may be lost alternate on the | |
|
| display. | |
|
| See also: Holding a job in the printer; | |
|
| 37 Insufficient Memory | |
|
|
| |
Held Jobs May Not Be | The printer memory cannot restore | Press Go to clear the message. Some of | |
Restored | Print and Hold jobs from the printer | the Print and Hold jobs stored on the disk | |
| hard disk. | will not be restored. | |
|
| See also: 37 Insufficient Memory | |
|
|
| |
Hole Punch Waste Full | The hole punch box in the finisher is | Empty the hole punch box. | |
| full. |
| |
|
|
| |
Insert Staple Cartridge | The staple cartridge in the finisher is | • Correctly install the staple cartridge to | |
| missing or is installed incorrectly. | clear the message. | |
|
| • Press Go to ignore the message and | |
|
| continue printing without stapling. | |
|
|
| |
Insert Tray <x> | The specified tray is either missing or | Insert the specified tray completely into the | |
| not fully inserted. | printer. | |
|
| See also: Loading the trays | |
|
|
| |
Install <device> or | The printer is requesting that a | • Turn the printer off, install the specified | |
Cancel Job | specified device be installed so it can | device, and restart the printer. | |
| print a job. | • Press Menu to open the Job Menu and | |
|
| cancel the current job. | |
|
|
| |
Invalid Engine Code | The printer engine code has not been | Call for service. | |
| programmed or is not valid. | See also: Calling for service | |
|
| ||
|
|
| |
Invalid Network <x> | The code in an internal print server is | Download valid code to the printer internal | |
Code | not valid. The printer cannot receive | print server. | |
| and process jobs until valid code is | Note: You can download network code | |
Invalid Standard | programmed into the internal print | ||
while this message is displayed. | |||
Network Code | server. |
| |
|
| ||
|
|
| |
ITU Maint | The counter that tracks wear on the | Replace the image transfer unit. | |
| image transfer unit has reached its |
| |
| limit. |
| |
|
|
| |
ITU/Fuser Maint | The counters that track wear on the | Replace the image transfer unit and fuser. | |
| image transfer unit and fuser have |
| |
| reached their limit. |
| |
|
|
|
79