Parallel Menu
Use the Parallel Menu to change printer settings affecting jobs sent to the printer through a parallel port (either Std Parallel or Parallel Opt <x>).
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item | Purpose | Values |
| |
Advanced | To enable bidirectional communication | Off | Disables parallel port negotiation. | |
Status | through the parallel port. |
|
| |
On* | Enables bidirectional communication | |||
|
| |||
|
|
| through the parallel interface. | |
|
|
|
| |
Honor Init | To determine whether the printer | Off* | Printer does not honor hardware | |
| honors hardware initialization requests |
| initialization requests from the | |
| from the computer. The computer |
| computer. | |
| requests initialization by activating the |
|
| |
| On | Printer honors hardware initialization | ||
| INIT signal on the parallel interface. | |||
|
| requests from the computer. | ||
| Many personal computers activate the |
| ||
|
|
| ||
| INIT signal each time the computer is |
|
| |
| turned on and off. |
|
| |
|
|
|
| |
Job | To temporarily store jobs on the printer | Off* | Does not buffer print jobs to the hard | |
Buffering | hard disk before printing. |
| disk. | |
| Note: Changing this menu item | On | Buffers print jobs to the hard disk. | |
| automatically resets the printer. | |||
|
|
| ||
| Auto | Buffers print jobs only if the printer is | ||
|
| |||
|
|
| busy processing data from another | |
|
|
| input port. | |
|
|
|
| |
MAC Binary | To configure the printer to process | On | Printer processes raw binary | |
PS | Macintosh binary PostScript print jobs. |
| PostScript print jobs from computers | |
|
|
| using the Macintosh operating system. | |
|
|
| Note: This setting often causes | |
|
|
| Windows print jobs to fail. | |
|
|
|
| |
|
| Off | Printer filters PostScript print jobs | |
|
|
| using standard protocol. | |
|
|
|
| |
|
| Auto* | Printer processes print jobs from | |
|
|
| computers using either Windows or | |
|
|
| Macintosh operating systems. | |
|
|
|
| |
NPA Mode | To specify whether the printer | On | Printer performs NPA processing. If | |
| performs the special processing |
| data is not in NPA format, it is rejected | |
| required for bidirectional |
| as bad data. | |
| communication, following the |
|
| |
| Off | Printer does not perform NPA | ||
| conventions defined in the Network | |||
|
| processing. | ||
| Printing Alliance (NPA) Protocol. |
| ||
|
|
| ||
| Note: Changing this menu item | Auto* | Printer examines data and determines | |
| automatically resets the printer. |
| the format and then processes it | |
|
|
| appropriately. | |
|
|
|
|
53