Ordering supplies and maintenance items
In the U.S. or Canada, call
You can also visit our Lexmark online store at www.lexmark.com to order supplies. Click the Web link on the bottom of this page.
Replacing maintenance items as needed helps you maintain top performance, optimize print quality, and avoid printing problems.
Ordering a fuser
When the 80 Fuser Maintenance message appears on the display, you should order a new fuser.
Note: Order the correct type of fuser for your printer. Only order a web oiler fuser if an authorized servicer has installed a web oiler upgrade kit to allow your printer to print large quantities of vinyl or dual web labels.
Type of fuser | Printer voltage | Part number |
Standard fuser | 100 V (Japan) | 12G6498 |
|
|
|
| 115 V | 12G6496 |
|
|
|
| 220 V | 12G6497 |
|
|
|
Web oiler fuser | 100 V (Japan) | 12G6502 |
|
|
|
| 115 V | 12G6514 |
|
|
|
| 220 V | 12G6515 |
|
|
|
Ordering a web oiler
When the 84 Oiler Nearly Exhausted or 84 Replace Oiler message appears on the display, you should order a new web oiler. Use P/N 12G6545 to order a web oiler.
Ordering an image transfer unit and transfer roller
When the 83 ITU Maintenance message appears on the display, you should order a new image transfer unit and transfer roller. Use P/N 56P1544 to order an image transfer unit and second transfer roller.
Ordering a print cartridge
When the 88 <color> Toner Low message appears on the display, you should order a new print cartridge. You can continue to print after the 88 <color> Toner Low message appears for a few hundred pages until the print fades or no longer prints satisfactorily.
Visit Lexmark’s Web site at www.lexmark.com for print cartridge ordering information.
108