Menu Item | Purpose | Values |
| |
Serial Buffer | To configure the size of the serial input | Disabled | Disables job buffering. Any jobs | |
| buffer. |
| already buffered on the disk are | |
| Note: Changing the Serial Buffer |
| printed before normal processing of | |
|
| incoming jobs resumes. | ||
| menu item automatically resets the |
| ||
|
|
| ||
| printer. | Auto* | Printer automatically calculates the | |
|
| |||
|
|
| Serial Buffer size (recommended | |
|
|
| setting). | |
|
|
|
| |
|
| 3K to | User specifies the Serial Buffer size. | |
|
| maximum | The maximum size depends on the | |
|
| size allowed | amount of memory in your printer, the | |
|
|
| size of the other link buffers, and | |
|
|
| whether Resource Save is set to On or | |
|
|
| Off. To maximize the range for the | |
|
|
| Serial Buffer size, disable or reduce | |
|
|
| the size of the parallel and USB | |
|
|
| buffers. | |
|
|
|
| |
Serial | To select the hardware and software | DTR* | Hardware handshaking. | |
Protocol | handshaking values for the serial |
|
| |
DTR/DSR | Hardware handshaking. | |||
| interface. | |||
|
|
| ||
|
| XON/XOFF | Software handshaking. | |
|
|
|
| |
|
| XON/XOFF/ | Combined hardware and software | |
|
| DTR | handshaking. | |
|
|
|
| |
|
| XONXOFF/ | Combined hardware and software | |
|
| DTRDSR | handshaking. | |
|
|
|
|
Setup Menu
Use the Setup Menu to configure a variety of printer features.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu Item | Purpose | Values |
| |
Alarm | To establish whether the printer | Off | Printer does not sound an alarm. | |
Control | sounds an alarm when the printer |
|
| |
Single* | Printer sounds three quick beeps. | |||
| requires operator intervention. | |||
|
|
| ||
|
| Continuous | Printer repeats three beeps every 10 | |
|
|
| seconds. | |
|
|
|
| |
Auto | To define the amount of time (in | Disabled* | Printer does not resume printing until | |
Continue | seconds) the printer waits after |
| someone clears the error message. | |
| displaying an operator intervention |
|
| |
| 5...255 | Printer waits the specified amount of | ||
| error message before it resumes | |||
|
| time, and then automatically resumes | ||
| printing. |
| ||
|
| printing. This timeout value also | ||
|
|
| ||
|
|
| applies if the menus are displayed | |
|
|
| (and the printer is offline) for the | |
|
|
| specified period of time. | |
|
|
|
| |
Black & | To set the printer to print only in black | Off* | Color prints as indicated in print job. | |
White Lock | and white. |
|
| |
On | The equivalent to setting Color Mode | |||
|
| |||
|
|
| to Black & White. | |
|
|
|
|
67
