After you have cleared the following areas, make sure all printer covers, doors, and trays are closed, and then press Go to resume printing.
Note: The printer also displays <x> Pages Jammed. Be sure to remove all the jammed pages before pressing Go.
Area A
1If you are using the multipurpose feeder, release the levers on each side of the feeder to lay it flat.
2Press the pick assembly release lever and remove all media and jams.
3Return the feeder to its working position and reload your media.
Area B
1Open the left access door.
2Pull down the lever until it stops.
3Remove all visible media.
Note: Remove any torn media from the printer.
4Return the lever to its upright position.
5Close the door.
Note: Open Tray 1 and make sure the entire media stack is pushed all the way down into the tray.
94
