Message | What this message means | What you can do |
39 Complex Page | The page may not print correctly | • Press Go to clear the message and |
| because the print information on the | continue printing the job. The job may |
| page is too complex. | not print correctly. |
|
| • Press Menu to open the Job Menu and |
|
| cancel the current job. |
|
| • To avoid this error in the future: |
|
| – Reduce the complexity of the page by |
|
| reducing the amount of text or |
|
| graphics on the page and deleting |
|
| unnecessary downloaded fonts or |
|
| macros. |
|
| – Set Page Protect to On in the Setup |
|
| Menu. |
|
| – Install additional printer memory. |
|
| See also: Setup Menu |
|
|
|
4<x> Unsupported | The printer detects an unsupported | • Turn the printer off, and then press and |
Firmware Card | version of firmware on the installed | hold Go while turning it on. The printer |
| firmware card. | reads the code on the system card and |
|
| bypasses the code on the firmware card. |
|
| • Remove the firmware card. |
|
| See also: Setup Guide |
|
|
|
40 <color> | The printer has detected an | Remove the indicated print cartridge and |
Invalid Refill | unsupported refilled cartridge. | install a new one. |
|
|
|
50 PPDS Font Error | The PPDS interpreter has | • Press Go to clear the message and |
| encountered a font error. | continue printing. |
|
| • Press Menu to open the Job Menu and |
|
| reset the printer or cancel the print job. |
|
|
|
51 Defective Flash | The printer detects defective flash | Press Go to clear the message and |
| memory. | continue printing. You must install different |
|
| flash memory before you can download any |
|
| resources to flash. |
|
|
|
52 Flash Full | There is not enough free space in the | • Press Go to clear the message and |
| flash memory to store the data you are | continue printing. Downloaded fonts and |
| trying to download. | macros not previously stored in flash |
|
| memory are deleted. |
|
| • Delete fonts, macros, and other data |
|
| stored on the flash memory. |
|
| • Install flash memory with more storage |
|
| capacity. |
|
|
|
53 Unformatted Flash | The printer detects unformatted flash | • Press Go to clear the message and |
| memory. | continue printing. You must format the |
|
| flash memory before you can store any |
|
| resources on it. |
|
| • If the error message remains, the flash |
|
| memory may be defective and require |
|
| replacing. |
|
|
|
54 Serial Option <x> | The printer has detected a serial | • Make sure the serial link is set up |
Error | interface error on a serial port. | correctly and you are using the |
|
| appropriate cable. |
54 Standard Serial |
| • Press Go to clear the message and |
Error |
| continue printing. The job may not print |
|
| correctly. |
|
| • Press Menu to open the Job Menu and |
|
| reset the printer. |
|
|
|
87