Message | What this message means | What you can do |
Load Manual | A request for a manual feed job has | • Load a sheet of the paper specified in |
<type> <size> | been sent to the printer. The printer is | the second line of the display in the |
| ready for insertion of a single sheet | manual feed tray or multipurpose feeder. |
| into the manual feed slot. | • Press Select or Go to ignore the manual |
|
| feed request and print on paper already |
|
| installed in one of the input sources. If |
|
| the printer finds a tray that has paper of |
|
| the correct type and size, it feeds paper |
|
| from that tray. If the printer cannot find a |
|
| tray with the correct paper type and size, |
|
| it prints on whatever paper is installed in |
|
| the default input source. |
|
| • Press Menu to open the Job Menu and |
|
| cancel the current job. |
|
| See also: Loading the multipurpose |
|
| feeder |
|
|
|
Load <x> Plain Letter | Someone has initiated a tray | Load paper into <x> and press Go to |
| calibration procedure. | continue the calibration process. |
|
|
|
Load Staples | The printer is trying to staple a print | • Install a new staple cartridge in the |
| job, but the stapler is empty. | stapler. |
|
| • Press Go to clear the message and |
|
| continue printing without stapling. |
|
| • Press Menu to open the Job Menu and |
|
| cancel the current job. |
|
|
|
Load Tray <x> | The printer is trying to feed paper from | • Load paper of the size and type |
| a source it detects is empty. | requested in the second line of the |
|
| display in the specified tray. The printer |
|
| automatically clears the message and |
|
| continues printing the job. |
|
| • Press Menu to open the Job Menu and |
|
| cancel the current job. |
|
| See also: Loading the trays |
|
|
|
Menus Disabled | The printer menus are disabled. You | You can still open the Job Menu to cancel a |
| cannot change the printer settings | job that is printing or to select a confidential |
| from the operator panel. | job or a held job that you want to print. If |
|
| you need access to the printer menus, |
|
| contact your network administrator. |
|
| See also: Disabling the operator panel |
|
| menus |
|
|
|
Network Card Busy | An internal print server (also called an | Wait for the message to clear. |
| internal network adapter or INA) is |
|
| being reset. |
|
|
|
|
Network <x> | A network interface is the active | Wait for the message to clear. |
| communication link. |
|
|
|
|
Network <x>, <y> | A network interface is the active | Wait for the message to clear. |
| communication link, where <x> |
|
| represents the active communication |
|
| link and <y> represents the channel. |
|
|
|
|
No DRAM Installed | No DRAM is installed in the printer. | Turn the printer off, install DRAM and turn |
|
| the printer back on. |
|
|
|
80