Message | What this message means | What you can do | ||
Staples Low | The stapler has only a few staples | • | Press Go to continue printing. | |
| remaining. | • Install a new staple cartridge to clear the | ||
|
|
| message. | |
|
|
| ||
Std Bin Full | The standard bin is full. | Remove the stack of paper in the bin to | ||
|
| clear the message. | ||
|
|
| ||
Supplies | At least one of the printer supplies | Press Menu to open the Supplies Menu | ||
| requires attention. For example, you | and identify which supply item needs | ||
| may have a toner cartridge that is low | replacing. Replace the appropriate printer | ||
| on toner. | supplies. | ||
|
|
| ||
Tray <x> Empty | The specified tray is out of paper. | Load paper in the tray to clear the | ||
|
| message. | ||
|
| See also: Loading the trays | ||
|
|
| ||
Tray <x> Low | The specified tray is low on paper. | Add paper to the tray to clear the message. | ||
|
| See also: Loading the trays | ||
|
|
| ||
Tray <x> Missing | The specified tray is either missing or | Insert the tray completely into the printer. | ||
| not fully inserted into the printer. | See also: Loading the trays | ||
|
| |||
|
|
| ||
USB <x> | The printer is processing data through | Wait for the message to clear. | ||
| the specified USB port. |
|
| |
|
|
|
| |
Waiting | The printer has received a page of | • | Press Go to print the contents of the | |
| data to print but is waiting for an End of |
| buffer. | |
| Job command, a Form Feed | • | Press Menu to open the Job Menu and | |
| command, or additional data. |
| cancel the current job. | |
|
| See also: Canceling a print job | ||
|
|
| ||
Messages | Turn the printer off and check all cable | |||
<message> | problems that may require printer | connections. Turn the printer back on. If the | ||
| service. | service message recurs, call for service | ||
|
| and report the message number and | ||
|
| description of the problem. | ||
|
| See also: Calling for service | ||
|
|
| ||
1565 Emul Error Load | The download emulator version on the | The printer automatically clears the | ||
Emul Option | firmware card does not match the | message in 30 seconds, and then disables | ||
| printer code version. | the download emulator on the firmware | ||
| This error can occur if you update | card. | ||
|
|
| ||
| printer firmware or move a firmware | Download the correct download emulator | ||
| card from one printer to another. | version from the Lexmark Web site. | ||
|
|
| ||
2<xx> Paper Jam | The printer detects a paper jam. | • Clear the paper path. | ||
<x> Pages Jammed | The printer displays the number of | • Check tray 1 to ensure media is loaded | ||
Check Area <x> | jammed pages and the area affected. |
| correctly. | |
See also: Understanding jam messages; | ||||
|
| |||
|
| Clearing the entire paper path; Loading | ||
|
| the trays | ||
|
|
| ||
30 ITU Error | The image transfer unit (ITU) is not | • Turn the printer off, correctly install the | ||
Check Area A | installed or is installed incorrectly, or |
| image transfer unit, and then turn the | |
/ | the lever [Z] which locks the image |
| printer on. | |
transfer unit into position is not | • Check the lever [Z] which locks the | |||
Move Z Down | ||||
engaged. |
| image transfer unit into position. | ||
Power Off/On |
| See also: Clearing image transfer unit | ||
|
| jams | ||
|
|
|
| |
84
