Message | What this message means | What you can do |
Canceling Fax | The printer is processing a request to | Wait for the message to clear. |
| cancel a fax job. |
|
|
|
|
Canceling Job | The printer is processing a request to | Wait for the message to clear. |
| cancel the current print job. | See also: Canceling a print job |
|
| |
|
|
|
Change <x> | The printer is requesting that a | Change the paper type in the specified |
| different type of paper be loaded in | source. |
| one of the input sources. | • Press Go if the requested media is |
|
| |
|
| already in the input source. |
|
| • Press Select to ignore the request and |
|
| print on the media already in the input |
|
| source. |
|
| See also: Loading the trays; Setup Guide |
|
|
|
Check <device> | The specified device is either not fully | • Reestablish communication by removing |
Connection | connected to the printer or is | the specified device and reattaching it to |
| experiencing a hardware failure. | the printer. |
|
| • Press Go to clear the message and |
|
| continue printing. |
|
| • In the case of a hardware failure, turn |
|
| the printer off and back on. If the error |
|
| recurs, turn the printer off, remove the |
|
| specified device, and call for service. |
|
|
|
Clearing Job | The printer is deleting all job statistics | Wait for the message to clear. |
Accounting Stat | stored on the hard disk. |
|
|
|
|
Close Door | The printer front cover is open. | Close the printer front cover to clear the |
|
| message. |
|
|
|
Close Finisher Door | The finisher front door is open. | Close the finisher front door to clear the |
|
| message. |
|
|
|
Close Tray X Door | The | Close the |
|
| message. |
|
|
|
Copying | The printer is processing a copy job | Wait for the message to clear. |
| originating from an OptraImage™ |
|
| scanner. |
|
|
|
|
Defragmenting | The printer is defragmenting the flash | Wait for the message to clear. |
| memory to reclaim storage space | Warning: Do not turn the printer off while |
| occupied by deleted resources. | |
| this message is displayed. | |
|
| |
|
|
|
Delete All Jobs | The printer is requesting confirmation | • Press Go to continue. The printer |
| to delete all held jobs. | deletes all held jobs. |
|
| • Press Stop to cancel the operation. |
|
|
|
Deleting Jobs | The printer is deleting one or more | Wait for the message to clear. |
| held jobs. |
|
|
|
|
Disabling Menus | The printer is responding to a request | Wait for the message to clear. |
| to disable the menus. | Note: While the menus are disabled, you |
|
| |
|
| cannot change the printer settings from the |
|
| operator panel. |
|
| See also: Disabling the operator panel |
|
| menus |
|
|
|
77
