Breville How to Clean a Multi Temperature Kettle: BKE820XL Care & Maintenance

CARE & CLEANING YOUR BREVILLE VARIABLE TEMPERATURE KETTLE™

Always unplug the appliance from the power outlet before cleaning.

Removable Filter

The Breville Variable Temperature Kettle™ features a removable mesh filter to remove scale deposits for cleaner water. To clean the scale deposits from the filter, remove the filter by opening the lid and sliding the filter up and out of the kettle.

The filter can be cleaned by placing under running hot water and rubbing with a cleaning cloth or brush. To replace the filter, simply slide the filter down into the slot behind the spout of the kettle and push back into position.

Removal Of Mineral Deposits

Mineral deposits in tap water may cause the kettle interior and water window to discolor over time. Mineral deposits may be removed by using a proprietary kettle descaler available from most leading supermarkets, department stores and hardware stores.

Alternatively:

1.Fill the kettle until two-thirds full with 1 part vinegar and 2 parts water. Boil and allow to stand overnight.

2.Empty the solution from the kettle. Fill the kettle with clean water, bring to boil and discard the water. Repeat and the kettle will be ready for use.

To Clean The Exterior

The outside of the kettle should be wiped with a damp cloth then polished with a soft, dry cloth.

NOTE:

The scale filter could become damaged with time, so please check regularly and replace if found damaged.

NOTE:

Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the kettle.

WARNING: TO PREVENT DAMAGE ! TO THE APPLIANCE, DO NOT USE

ALKALINE CLEANING AGENTS WHEN CLEANING. USE A SOFT CLOTH AND MILD DETERGENT.

WARNING: DO NOT REMOVE THE ! DIFFUSER RING LOCATED ON THE

BASE INSIDE THE KETTLE.

WARNING: NEVER IMMERSE THE ! KETTLE BASE, POWER BASE,

POWER CORD OR POWER PLUG IN WATER, OR ALLOW MOISTURE TO COME IN CONTACT WITH THESE PARTS.

Storage

Ensure the kettle is switched off, cleaned and dried before storing. Ensure that the lid is closed and locked securely into place. Wrap the power cord around the power cord storage under the power base. Stand the kettle upright on the power base. Do not store anything on top.

19