Fujitsu M2488 manual Table F-2. Error Codes Common to all Routines/Tests

DIAGNOSTIC TESTS AND ERROR CODES

DIAGNOSTIC TESTS AND ERROR CODES M2488 PRODUCT GUIDE

Table F-1. Diagnostic Test Registry for all Diagnostic Modes (Continued)

ROUTINE	TEST		DIAGNOSTIC MODES					TITLE
		OFF-LINE		ON-LINE	GO/NO-GO	MFG
83	04					x	Operator Control Panel drive LED test
84	01					x	Library I/F Port output test
84	02					x	Library I/F Port input test
90	01	x		x		x	Drive Diag: LOAD test
90	02	x		x		x	Drive Diag:	AC/PS, MODCH tests
90	03	x		x		x	Drive Diag:	TPPFM test
90	04	x		x		x	Drive Diag:	LOCAT test
90	05	x		x		x	Drive Diag:	D.S.E. test
90	06	x		x		x	Drive Diag:	REWND test
90	07	x		x		x	Drive Diag:	UNLOD test
90	08	x		x		x	Drive Diag:	ACL LDUL test

Refer to Chapter 8 for Diagnostics information and displays. Table F-3 through Table F-25 lists and describes the Diagnostic Error Codes. Refer to Table F-1 for the Diagnostic Test Registry.

Table F-2. Error Codes Common to all Routines/Tests

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
*	*	Error Codes common to all tests	0xFA	A Check 1 condition was left pending, which
		of routines greater than 0x02.		was able to be cleared.
			0xFE	A Check 1 condition was left pending, which
				could not be cleared.
			0xFC	The RSVP code download to the PCC LSI
				failed.
			0xFD	Real Time Clock initialization in the PCC LSI
				failed.

F-6 CG00000-011503 REV. A April 1997