Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
Table F-24. Routine 83 - Operator Control Panel Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x83	0x01	Operator Control Panel keys test	0x06		START switch release not detected in allotted
					time.
			0x07		TEST switch press not detected in allotted
					time.
			0x08		TEST switch release not detected in allotted
					time.
			0x09		SHIFT switch press not detected in allotted
					time.
			0x0A		SHIFT switch release not detected in allotted
					time.
0x83	0x02	Operator Control Panel display	0x01		Scrolling message not acknowledged within
		test			allotted time.
			0x02		General message, first half not acknowledged
					within allotted time.
			0x03		General message, flash first half not acknowl-
					edged within allotted time.
			0x04		General message, last half not acknowledged
					within allotted time.
			0x05		General message, flash last half not acknowl-
					edged within allotted time.
			0x06		General message, alternating first/last half not
					acknowledged within allotted time.
			0x07		Blinking character message not acknowl-
					edged within allotted time.
0x83	0x03	Operator Control Panel tape LED	0x01		Correct tape position LED sequence not
		test			acknowledged within allotted time.
0x83	0x04	Operator Control Panel drive LED	0x01		Correct operation of SELECT LED not
		test			acknowledged within allotted time.
			0x02		Correct operation of COMPRESSION LED
					not acknowledged within allotted time.

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-77