M2488 PRODUCT GUIDE MAINTENANCE AND SERVICING
April 1997 CG00000-011503 REV. A 8-53
8-11.10 Power Supply (P SU) Remove and Replace Procedures.
Refer to Figure 8-12 for location of the PSU.
8-11.10.1 Power Supply Removal
8-11.10.2 Power Supply Replacement
Figure 8-12. PSU
STEP ACTION
1 Perform the DTC PCBA removal procedure in paragraph 8-11.6.1 on page 8-48.
2 Remove the three screws securing the power supply.
3 Disconnect connectors CNP91, CNP92, CNP93, and CNP94.
4 Lift out power supply to remove.
STEP ACTION
1 Insert power supply into the tape drive.
2 Use the three screws to secure power supply.
3 Connect connectors CNP91, CNP92, CNP93, and CNP94.
4 Perform the DTC PCBA replacement procedure in paragraph 8-11.6.2 on page 8-48.