Fujitsu M2488 Appendix E CHK XX Error Codes, CHK XX Error Code Descriptions, CHK Description Code

M2488 PRODUCT GUIDE CHK XX ERROR CODES

APPENDIX E

CHK XX ERROR CODES

E-1 CHK XX ERROR CODE DESCRIPTIONS

Table E-1 lists the error codes and a brief description of each one. Refer to Chapter 8 for a an explana- tion of this type of error message.

	Table E-1. CHK xx Error Code Descriptions
CHK XX	DESCRIPTION
CODE
00	MICRO PROCESSOR ERROR
01	RAM ERROR
02	REGISTER ERROR
03	TIMER ERROR
04	INTERRUPT ERROR (WRONG IRQ TO SERVO)
05	TOO MANY FTP INTERRUPTS
06	TOO FEW FTP INTERRUPTS
09	MACHINE REEL TACHOMETER PHASE ERROR
0A	MACHINE REEL ROTATION COUNTER OVERFLOW
0B	RRC COUNTER OVERFLOW
0C	GAP COUNTER PHASE ERROR
15	TOO SHORT LENGTH TAPE LOADED
17	BOT TIGHT UP ERROR
18	MACHINE REEL RUN AWAY IN LOADING
19	INVALID GAP OUT TIME
1B	WRITE VELOCITY CHECK
1C	OVER GAP IN POSITION
1D	GAP IN HARDWARE ERROR
1F	FILE OR MACHINE REEL TACHO METER ERROR
20	CARRIER MOVE UPWARD TIMEOUT ERROR
21	CARRIER MOVE DOWNWARD TIMEOUT ERROR
24	THREADER SENSORS COMBINATION ERROR
25	THREADER ARM IS NOT HOME WHEN LOADING STARTS
26	CARRIER POSITION SENSOR ALWAYS ON
28	CATCH ARM CLOSE TIMEOUT ERROR

April 1997 CG00000-011503 REV. A E-1