Fujitsu manual Drive with Facl Attached, M2488 with Facl in Desktop Model

M2488 PRODUCT GUIDE INSTALLATION INSTRUCTIONS

1-6.4.5 Drive with FACL Attached

Figure 1-9 shows the M2488 with an attached FACL in a desktop model.

Figure 1-9. M2488 with FACL in Desktop Model

Use the following procedure to insert the M2488 with attached FACL into the desktop model. Refer to Figure 1-10 through Figure 1-12 during performance of this procedure.

STEP ACTION

1Insert the M2488 with FACL into the bottom base. Attach through bottom of base into bottom of M2488 and FACL with eight screws. See Figure 1-10.

2Place the desktop cover over the M2488 and FACL. See Figure 1-11.

3Tighten the eight screws into the sides of the bottom base.

4Place rear cover over back opening and tighten with four screws. See Figure 1-12.

April 1997 CG00000-011503 REV. A 1-15