Fujitsu M2488 manual MTC to MTU Commands, Command Code

MAINTENANCE AND SERVICING						M2488 PRODUCT GUIDE
	Table 8-10. Format 01h Sense Information, Drive Field Description (Continued)
BYTE	BIT	VALUE		DESCRIPTION
29	0-7		This is the command code of the command being processed when the error was detected.
30	0-7		Drive status at the time the error was detected.
31	0-7		The Drive Model Number is 03h.
32	0-7		The DRV ERR CMD Code 1 indicates the command being executed by the MTU when
			the first error was detected.
33	0-7		The DRV ERR Code 1 is the error code of the first MTU error encountered.
34	0-7		Write error hardware register 1
35	0-7		Write error hardware register 2
36	0-7		Sequence status set when an error has occurred.
37	0-7		Servo status code is set when an error has occurred.
38	0-7		Command code is set when command has occurred.
			Table 8-11. MTC to MTU Commands
			COMMAND		CODE
			STOP		00
			CLEAR ERROR		01
			DOOR SOLENOID		02
			SERVO DIAGNOSTIC		03
			LOAD CARTRIDGE		04
			REWIND		05
			REWIND AND UNLOAD		06
			SEARCH SECTOR		07
			MOVE FORWARD READ		08
			MOVE BACKWARD READ		09
			MOVE FOR WRITE		0C
			DATA SECURITY ERASE		0E
			MOVE MAGAZINE		0F
			WRITE ALL ZERO		10
			SHUFFLE		11
			MICROCODE DOWNLOAD		D0
			MICROCODE START		DF

8-12 CG00000-011503 REV. A April 1997