Fujitsu M2488 manual Table E-1 CHK xx Error Code Descriptions

CHK XX ERROR CODES			M2488 PRODUCT GUIDE
		Table E-1.	CHK xx Error Code Descriptions (Continued)
	CHK XX		DESCRIPTION
	CODE
	CB	MAGAZINE TOP DETECTED DURING MOVING UP OR UNLOADING
	D0	ACL SENSOR CABLE CHECK
	D1	MAGAZINE MISPOSITION CORRECTION ERROR
	D2	FEEDER ARM SENSOR OP/CL BOTH ON
	D3	MOUNT ARM HOME SENSOR FAILURE
	D4	FEED IN TOO FAST
	D5	FEED IN RETRIES EXHAUSTED
	D6	CARTRIDGE IN MAGAZINE ALWAYS ON
	D7	CARTRIDGE CATCH TIMEOUT
	D8	MOUNT ARM DOES NOT RETURN BACK TO HOME
	D9	MOUNT CARTRIDGE RETRIES EXHAUSTED
	DA	UNFEED RETRIES EXHAUSTED
	DB	UNFEED TOO FAST OR CTG IN MAG SENSOR ALWAYS ON
	DC	INTERLOCK SW DETECT ERROR
	DD	CARTRIDGE INSTALLED INCORRECTLY
	DF	UNFEED SENSOR IS ON OR UNFEED COMPLETE
	E0	FILE PROTECTED DURING WRITE OR DSE
	E5	READ HEAD BIAS ERROR
	E9	WRITE HEAD CIRCUIT HARDWARE ERROR
	EC	NOVRAM DATA ERROR
	ED	DOWN LOAD COMMAND CAN NOT EXECUTE
	EE	EJECT CLEANING CELL SENSOR ON
	EF	SERVO PROGRAM DOWN LOAD ERROR
	F1	FAN ONE STOP OR SLOW ROTATION ERROR
	F2	FAN TWO STOP OR SLOW ROTATION ERROR
	F7	UNDEFINED SERVO OFFLINE ERROR
	F8	NO CLEANING CARTRIDGE OR CANNOT EJECT CLEANING CARTRIDGE
	F9	CLEANING CARTRIDGE IS NOT INSERTED IN CLEANING CELL
	FA	CLEANING CARTRIDGE IS NOT KEPT IN CLEANING CELL
	FB	DOOR OPEN ERROR DURING POWER UP
	FC	DOOR OPEN ERROR

E-6 CG00000-011503 REV. A April 1997