Fujitsu M2488 manual Read Position Sense Keys, Sense KEY Condition Description

M2488 PRODUCT GUIDE TAPE UNIT SCSI COMMANDS

4-3.17.4 READ POSITION Sense Keys

One of the following sense keys may be returned if a CHECK CONDITION was indicated:

SENSE KEY	CONDITION		DESCRIPTION
5h	ILLEGAL REQUEST	1. Reserved bit was found set in the CDB of the READ POSI-
			TION command.
		2.	The Flag bit was set but the Link bit was not set.
6h	UNIT ATTENTION	Indicates the READ POSITION command was not performed due
		to one of the following:
		1.	The tape cartridge may have been changed.
		2.	The target has been reset.
		3.	The Mode parameters have been changed by another initiator.
		4.	The version of the microcode has been changed (microcode
			downloaded).
		5.	A cartridge was loaded with a tape length that is too long or too
			short.
Bh	ABORTED COMMAND	READ POSITION command was aborted. The READ POSI-
		TION command can be reissued.

April 1997 CG00000-011503 REV. A 4-79