Fujitsu M2488 manual Drive with ACL Attached 10-Cartridge Magazine, Attaching Bases

INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE

1-6.4.4 Drive with ACL Attached (10-Cartridge Magazine)

Use this procedure if the M2488 with attached ACL is to be used with a base for a 10-cartridge magazine.

STEP ACTION

1Place the support base onto the M2488A41 (10-cartridge base) and attach with the four screws. See Figure 1-4.

2For additional stability, attach the rubber feet and two metal brackets on the bottom of the M2488A41 as shown in Figure 1-5 on page 1-13.

3Place the drive with ACL on the support base. Move the drive forward and attach to the pro- jections on the support base. See Figure 1-6 on page 1-13 and Figure 1-7 on page 1-14.

4Insert the projections of the rear bracket into the gap on each foot rail. Attach rear bracket with two screws through the rear of the support base. See Figure 1-8 on page 1-14.

Figure 1-4. Attaching Bases

1-12 CG00000-011503 REV. A April 1997