Fujitsu M2488 manual StorMT 1b

MEDIA CHANGER COMMANDS M2488 PRODUCT GUIDE

6-3.4 Page Code 1Fh, Device Capabilities

Table 6-48. ACL Page Code 1Fh, Device Capabilities

					BITS					MODE SENSE
										DEFAULT
BYTES	7	6	5	4		3	2	1	0
										VALUES
0	PS *	Reserved				Page Code				9Fh
1				Additional Page Length						0Eh
2		Reserved				StorDT 0b	StorIE 0b	StorST 1b	StorMT 1b	03h
3					Reserved					00h
4		Reserved				MT→DT	MT→IE	MT→ST	MT→MT	00h
						0b	0b	0b	0b
5		Reserved				ST→DT	ST→IE	ST→ST	ST→MT	0Ch
						1b	1b	0b	0b
6		Reserved				IE→DT	IE→IE	IE→ST	IE→MT	0Ah
						1b	0b	1b	0b
7		Reserved				DT→DT	DT→IE	DT→ST	DT→MT	06h
						0b	1b	1b	0b
8-11					Reserved					00h
12		Reserved				MT↔DT	MT↔IE	MT↔ST	MT↔MT	00h
						0	0	0	0
13		Reserved				ST↔DT	ST↔IE	ST↔ST	ST↔MT	02h
						0	0	0	0
14		Reserved				IE↔DT	IE↔IE	IE↔ST	IE↔MT	00h
						0	0	0	0
15		Reserved				DT↔DT	DT↔IE	DT↔ST	DT↔MT	00h
						0	0	0	0
Key:
MT - Medium Transport Element				ST - Storage Element
IE - Import/Export Element				DT - Data Transfer Element

* The PS bit must be set to 0 on a MODE SELECT command.

** NOTE **

All fields are reported as NOT changeable. The default values are shown in the table. Reserved fields always have a default value of zero.

For more information about how the Device Capabilities page can be used for MOVE MEDIUM operations, see Table 6-16 for XCL allowed moves.

An XX → YY bit value of one indicates that the Medium Changer supports MOVE MEDIUM com- mands where the source element is type XX and the destination element is type YY. The following sources and destinations are supported:

ST → DT	Select cartridge from magazine and load cartridge into tape unit.
ST → IE	Unload magazine.
ST → ST	Move cartridge in magazine to empty slot in magazine.

6-38 CG00000-011503 REV. A March 1997