Fujitsu M2488 manual Diagnostic Page Codes, Receive Diagnostic Results Page, General Form

M2488 PRODUCT GUIDE TAPE UNIT SCSI COMMANDS

4-3.20.2 Diagnostic Page Codes (PF=1 in SEND DIAGNOSTIC command CDB)

If the Page Format (PF) bit was set to 1 in a previous SEND DIAGNOSTIC command, the RECEIVE DIAGNOSTIC RESULTS (FACTORY MODE) command will return diagnostic result data in paged format with 00h, 80h, 81h, and 90h through 9Fh as the returned Page Code. Refer to Table 4-86 and Table 4-87.

	Table 4-86. Diagnostic Page Codes
QUALIFIER	DESCRIPTION
00h	Supported diagnostics pages (see Table 4-79)
80h	Online diagnostic test page (see Table 4-80)
81h	Manufacturing Online diagnostic test page (FACTORY MODE
	only, see Table 4-91)
90-9Fh	MTU Online diagnostic test pages (FACTORY MODE only, see
	Table 4-93)

Table 4-87. Receive Diagnostic Results Page, General Form

						BITS
BYTES	7	6	5		4		3	2	1	0
0					Page Code (XXh)
1						Reserved
2-3					Page Length (n-3)
4-N				Diagnostic Parameters

Description of the Page Code 00h

The Page Code 00h instructs the target to make available the list of all supported diagnostic pages to be returned by a subsequent RECEIVE DIAGNOSTIC RESULTS (FACTORY MODE) com- mand.

Table 4-88. Page 00h - Supported Diagnostic Pages (FACTORY MODE)

						BITS
BYTES	7	6	5		4		3	2	1	0
0					Page Code (00h)
1						Reserved
2-3					Page Length (0013h)
4				Supported page list (00h)
5				Supported page list (80h)
6				Supported page list (81h)
7				Supported page list (90h)

April 1997 CG00000-011503 REV. A 4-91