Fujitsu M2488 manual Table F-5. Routine 3 CP Bus Parity Diagnostic Error Codes

M2488 PRODUCT GUIDE DIAGNOSTIC TESTS AND ERROR CODES

Table F-5. Routine 3 - CP Bus Parity Diagnostic Error Codes

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x03	0x01	CP Bus parity - Control Store	0x01	An unexpected Check 1 condition was prema-
				turely detected at the beginning of this test
			0x02	CP Bus parity error was not set as expected
				after attempting a read a Control Store loca-
				tion previously written with bad parity
			0x03	An unexpected Check 1 condition was pend-
				ing after it should have been cleared
			0x04	A CP bus parity error was not detected as
				expected after a write/read operation on a
				word of control store with forced bad parity
			0x05	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x06	A CP bus parity error was not detected as
				expected after reading a word previously writ-
				ten with bad parity
			0x07	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x10	A CP bus parity error was not detected after
				writing byte 0 of a word with bad parity
			0x11	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x12	A CP bus parity error was not detected after
				reading byte 0 of a word which was previ-
				ously written with bad parity
			0x13	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x20	A CP bus parity error was not detected after
				writing byte 1 of a word with bad parity
			0x21	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x22	A CP bus parity error was not detected after
				reading byte 1 of a word which was previ-
				ously written with bad parity
			0x23	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made
			0x30	A CP bus parity error was not detected after
				writing byte2 of a word with bad parity
			0x31	An unexpected Check 1 condition was pend-
				ing after an attempt to clear it was made

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-9