Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
Table F-9. Routine 7 - SCSI Protocol Controller Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x07	0x04	SPC to Data Buffer DMA test	0x09		Incorrect SCSI bus status during diagnostic
					data transfer while expecting REQ de-asser-
					tion
			0x0A		SPC reported an incorrect data transfer length
			0x0B		Record/Buffer manager did not report suc-
					cessful completion for the DMA transfer
			0x0C		Data miscompare detected in SPC MSC
					buffer after DMA data transfer completed
			0x10		SPC did not generate an interrupt request
			0x11		SPC interrupt was not detected at the Interrupt
					Request Controller
			0x12		The SPC interrupt was cleared while clearing
					the Interrupt Request Controller.
			0x13		An incorrect SPC interrupt/step code was
					reported
			0x14		The SPC interrupt request could not be
					cleared
			0x20		SPC did not generate an interrupt request
			0x21		SPC interrupt was not detected at the Interrupt
					Request Controller
			0x22		The SPC interrupt was cleared while clearing
					the Interrupt Request Controller.
			0x23		SPC interrupt/step code did not report Com-
					mand Complete
			0x24		The SPC interrupt request could not be
					cleared
0x07	0x05	SPC MPU bus parity test	0x01		SPC reported incorrect status
			0x02		Bad SCSI bus status detected waiting for REQ
					assertion during diagnostic data transfer
			0x03		Incorrect SCSI bus status during diagnostic
					data transfer while expecting REQ de-asser-
					tion
			0x04		SPC did not generate an interrupt request
			0x05		SPC interrupt was not detected at the Interrupt
					Request Controller
			0x06		The SPC interrupt was cleared while clearing
					the Interrupt Request Controller.
			0x07		SPC interrupt/step code did not report MPU
					Parity Error as expected

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-21