Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
	Table F-5. Routine 3 - CP Bus Parity Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x03	0x03	CP Bus parity - SPC	0x43		The SPC interrupt/step code did not report a
					Register Parity error as expected after chang-
					ing the SPC parity from odd to even
			0x44		The SPC interrupt request could not be
					cleared
			0x50		An SPC interrupt request was not generated
					by the SPC during diagnostic test
			0x51		An expected SPC interrupt was not detected
					in the Interrupt Request Controller (IRC)
			0x52		The SPC interrupt was inadvertently cleared
					when the Interrupt Request Controller was
					cleared
			0x53		The SPC interrupt/step code did not report a
					Register Parity error as expected after chang-
					ing the SPC parity from odd to even
			0x54		The SPC interrupt request could not be
					cleared
			0x60		An expected SPC interrupt request was not
					generated by the SPC
			0x61		An expected SPC interrupt was not detected
					in the Interrupt Request Controller (IRC)
			0x62		The SPC interrupt was inadvertently cleared
					when the Interrupt Request Controller was
					cleared
			0x63		The SPC interrupt/step code did not report a
					Command Complete as expected
			0x64		The SPC interrupt request could not be
					cleared
			0x80		An SPC interrupt request was not generated
					by the SPC during SPC setup restoration
			0x81		An expected SPC interrupt was not detected
					in the Interrupt Request Controller (IRC)
			0x82		The SPC interrupt was inadvertently cleared
					when the Interrupt Request Controller was
					cleared
			0x83		The SPC interrupt/step code did not report a
					Command Complete as expected after restor-
					ing SPC setup
			0x84		The SPC interrupt request could not be
					cleared

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-13