Fujitsu M2488 manual Table F-25. Routine 90 Tape Drive Diagnostic Error Codes

DIAGNOSTIC TESTS AND ERROR CODES M2488 PRODUCT GUIDE

DIAGNOSTIC TESTS AND ERROR CODES

Table F-25. Routine 90 - Tape Drive Diagnostic Error Codes

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x90	*	All Drive Diag tests	0xE0	A DVL card was not detected. This routine
				requires that the DTC card be properly con-
				nected to a DVL card.
			0x01	Error transferring diagnostic parameters
				through the Shared RAM interface.
			0x05	Error receiving diagnostic results through the
				Shared RAM interface. (MFG mode only)
x90	0x01	Drive Diag: LOAD test	0x02	Servo error reported during drive diagnostic
				cartridge load test.
0x90	0x02	Drive Diag: AC/PS, MODCH	0x02	Servo error reported during drive diagnostic
		tests		access/positioning test or mode change test.
0x90	0x03	Drive Diag: TPPFM test	0x02	Servo error reported during drive diagnostic
				tape acceleration/decleration test.
0x90	0x04	Drive Diag: LOCAT test	0x02	Servo error reported during drive diagnostic
				tape locate test.
0x90	0x05	Drive Diag: D.S.E test	0x02	Servo error reported during drive diagnostic
				Data Security Erase test.
0x90	0x06	Drive Diag: REWND test	0x02	Servo error reported during drive diagnostic
				rewind test.
0x90	0x07	Drive Diag: UNLOD test	0x02	Servo error reported during drive diagnostic
				cartridge unload test.
0x90	0x08	Drive Diag: ACL LDUL test	0xE0	A DVL card was not detected. This routine
				requires that the DTC card be properly con-
				nected to a DVL card.
			0xE1	Autoloader not detected. Must have an auto-
				loader attached to run this test.
			0xE2	Servo error reported during tape removal.
			0xE3	Servo error reported during magazine
				removal.
			0xE4	Servo error reported during magazine inser-
				tion.
			0xE5	Servo error reported while waiting for FACL
				door to be closed.
			0xE6	Servo error reported while waiting for START
				switch to be pressed to load a tape.
			0xE7	Servo error reported during magazine load.
			0xE8	Servo error detected during magazine opera-
				tion.

F-78 CG00000-011503 REV. A April 1997