Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
Table F-15. Routine 13 - EDRC Error Detection Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x13	0x07	Write PPh host crc error check	0x01		Initial SPC write status is incorrect.
			0x02		Error reported by Record Manager Write
					Buffer function while attempting to write
					EDRC non-compacted.
			0x03		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal assertion.
			0x04		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal deassertion.
			0x05		Data transfer length error reported by SPC
			0x06		SDDP failed to report expected host Packet
					Processor CRC error.
0x13	0x08	Write PPh host count error check	0x01		Initial SPC write status is incorrect.
			0x02		Error reported by Record Manager Write
					Buffer function while attempting to write SG
					EDRC non-compacted.
			0x03		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal assertion.
			0x04		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal deassertion.
			0x05		Data transfer length error reported by SPC
			0x06		SDDP failed to report expected host Packet
					Processor error count.
0x13	0x09	Read Compression error/sgd crc-	0x01		Failed to receive data end-of-transfer signal in
		a errors			SDDP hdxs register.
			0x02		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal assertion.
			0x03		Incorrect SPC SCSI control signal status wait-
					ing for REQ signal deassertion.
			0x04		Data transfer length error reported by SPC
			0x05		SDDP failed to report expected data compres-
					sion error.
			0x06		SDDP failed to report expected data compres-
					sion host count error.
			0x07		SDDP failed to report expected data compres-
					sion host CRC error.
			0x08		SDDP failed to report expected CRCA error.

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-47