Fujitsu M2488 manual Table E-1 CHK xx Error Code Descriptions

M2488 PRODUCT GUIDE			CHK XX ERROR CODES
		Table E-1.	CHK xx Error Code Descriptions (Continued)
	CHK XX		DESCRIPTION
	CODE
	9B	DOOR SOLENOID LOCK SENSOR ALWAYS ON
	9C	DOOR SOLENOID LOCK SENSOR OFF
	9D	SERVO PROGRAM ERROR
	9E	FACL OVER CURRENT DETECTED
	A1	MISSING GAP IN INTERRUPT ON MOTION COMMAND
	A2	SERVO COMMAND FAILED TO COMPLETE IN ALLOTTED TIME
	A3	MOTION COMMAND TO NOT READY DEVICE
	A4	WRITE OR D.S.E. COMMAND TO FILE PROTECTED DEVICE
	A5	NO RESPONSE FROM SERVO MPU SENDING COMMAND
	A9	WRITE FPC CABLE CHECK WRAP 1
	AA	WRITE FPC CABLE CHECK WRAP 2
	AE	PROGRAM DOWN LOAD FAILURE
	AF	CANNOT EXECUTE PROGRAM DOWN LOAD
	B0	TRANSFER DATA COUNT ERROR
	B1	WRAP DIRECTION ERROR
	B2	INVALID SECTOR
	B3	UNEXPECTED COMMAND END INTERRUPT
	B4	AUTOLOADER COMMAND RECEIVED TO NONEXISTENT DEVICE
	B6	UNACCEPTABLE AUTOLOADER PARAMETER
	B9	RESET KEY PRESSED BY OPERATOR
	C0	LOAD MAGAZINE COMMAND CAN NOT EXECUTE
	C1	MOVE MAGAZINE COMMAND PARAMETER ERROR
	C2	MOVE MAGAZINE COMMAND CAN NOT EXECUTE
	C3	NO MAGAZINE AT CTG UNLOAD
	C4	ACL OVER CURRENT
	C5	PINION PHASE ADJUST TIMEOUT
	C6	BOTTOM STOPPER-ARM MOVING RETRIES EXHAUSTED
	C7	BOTTOM STOPPER SENSOR <UP> & <DW> BOTH ON
	C8	DOWNWARD MOVE MAGAZINE TIMEOUT
	C9	UPWARD MOVE MAGAZINE TIMEOUT
	CA	MAGAZINE POSITION MISCALCULATION

April 1997 CG00000-011503 REV. A E-5