Fujitsu M2488 Factory Menu Options and Settings Description, Option Settings Description Initial

M2488 PRODUCT GUIDE MAINTENANCE AND SERVICING

Navigation keys:

To navigate through the options, settings, and to make changes from the Operator Panel:

Press START to move forward through the options or settings. It will also increment the setting num- bers.

Press SHIFT and START to move backward through the options or settings. It will also decrement the setting numbers.

Press RESET to move from settings to option or to leave setting mode. Press TEST to move from the option to settings.

Press UNLOAD to select a number field for multiple digit numbers.

Setting Procedure:

Step 1. At the ✳, press and hold the TEST and UNLOAD push-button simultaneously until DIAG- MODE is displayed.

Step 2. Press the START push-button until FACTORY is displayed. Note: SHIFT + START may be pushed one time.

Step 2. Press the TEST pushbutton.

Step 3. The first option, F0:FACT0, is displayed. Press TEST will allow changing this setting if the unit is in factory mode.

Step 4. Press the START push-button or SHIFT+START keys to select other factory options described as follows:.

Table 8-23 describes the factory menu options and settings.

Table 8-23. Factory Menu Options and Settings Description

			DEFAULT/
OPTION	SETTINGS	DESCRIPTION	INITIAL
			SETTINGS
F0:FMODE0	N/A	Factory mode setting 0 - presently not used.	00h
F1:FMODE1	N/A	Factory mode setting 1 - presently not used.	00h
F2:FMODE2	N/A	Factory mode setting 2 - presently not used.	00h
F3:FMODE3	N/A	Factory mode setting 3 - presently not used.	00h
F4:MTIME	MTIME	Tape motion time in seconds. Eight digit hexadecimal number.	00h
F5:PTIME	PTIME	Number of minutes the M2488 has been powered on. Eight digit	00h
		hexadecimal number.
F6:SRNUM	SRNUM	Serial number of M2488 represented by 16 ASCII character string.	SRNUM
F7:*****	N/A	Unused factory setting menu item.
G8:FMODE	DISABLE	Factory mode is disabled. Press START key to move to ENABLE.	N/A
	ENABLE	Press TEST, PW=”?????” <-?is displayed.
G9: xxxxx	N/A	Unused factory setting menu item.	N/A
G10:WTROM	N/A	Write to NVRAM the settings as changed. This menu item only	N/A
		appears when Factory mode is enabled.

April 1997 CG00000-011503 REV. A 8-29