Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE DIAGNOSTIC TESTS AND ERROR CODES

Table F-21. Routine 80 Test 06 - Servo FACL Error Codes in Sense Byte 19

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x80	0x06	Sense byte 19 for FACL	0x01	Door close sensor or door solenoid lock sen-
				sor off error
			0x02	Door solenoid lock timeout error
			0x03	Door solenoid unlock timeout error
			0x10	Carrier move up timeout error
			0x11	Carrier move down timeout error
			0x12	Carrier position sensor on too fast error
			0x13	Carrier position sensor off too fast error
			0x14	Carrier stopped at fault position
			0x20	Catch arm open timeout error
			0x21	Catch arm open sensor on too fast error
			0x22	Catch arm close timeout error
			0x23	Catch arm close sensor on too fast error
			0x24	Catch arm open and close sensors both on
				error
			0x30	Mount arm move drive side timeout error
			0x31	Mount arm drive end sensor on too fast error
			0x32	Mount arm move magazine side timeout error
			0x33	Mount arm magazine end sensor on too fast
				error
			0x34	Mount arm home and drive end sensors both
				on error
			0x35	Mount arm home and magazine sensors both
				on error
			0x40	No cleaning cartridge or not out of cleaning
				cell

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-73