Fujitsu M2488 manual Guide Plate Installation Screw Plate Mounting, Attach Mounting Tray

INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE

Figure 1-13. Guide Plate Installation

1-6.5.3 Screw Plate Mounting

See Figure 1-14.

STEP ACTION

1Each screw plate has nine holes. Mount the screw plate so that the big hole is up.

2Attach 4 screw plates (g) to the rear of each pole of the rack with two screws (i -SBD-5x2S-M- NI1A) in the top and bottom holes.

1-6.5.4 Attach Mounting Tray

See Figure 1-14.

NOTE: When the mounting hole of the rack is a screw hole, remove the positioning pins at both the left and right sides of the tray (d) with a screwdriver.

STEP ACTION

1Insert mounting tray (d) into the 19-inch rack and attach the front with six screws (j - SW2NA- 5x12S-M-NI1A).

2Attach 2 brackets (f) to both the left and right sides of the tray (d) with six screws (k).

3Attach brackets (f) to the left and right rear poles of the rack with eight screws (j) and tighten.

1-20 CG00000-011503 REV. A April 1997