Electrolux EI28BS65KS manual Care and cleaning tips, Removing the Ice Chute Extension For Cleaning

		Care and Cleaning	33
Care and cleaning tips
Part	Cleaning Agents	Tips and Precautions
Interior & Door	• Soap and water	• Use two (2) tablespoons of baking soda in one (1) quart of warm water.
Liners	• Baking soda and	• Be sure to wring excess water out of sponge or cloth before cleaning around controls, light
	water	bulb or any electrical part.
Door Gaskets	• Soap and water	• Wipe gaskets with a clean soft cloth.
Drawers & Bins	• Soap and water	• Use a soft cloth to clean drawer runners and tracks.
		• Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass Shelves	• Soap and water	• Allow glass to warm to room temperature before immersing in warm water.
	• Glass cleaner
	• Mild liquid
	sprays
Toe Grille	• Soap and water	• Remove toe grille (see Installation Instructions).
	• Mild liquid	• Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
	sprays
	• Vacuum
Exterior &	• Soap and water	• Do not use commercial household cleaners containing ammonia, bleach or alcohol to clean
Handles		handles.
	• Non abrasive	• Use a soft cloth to clean smooth handles.
	glass cleaner	• Do not use a dry cloth to clean smooth doors.
Exterior &	• Soap and water	• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
Handles	• Stainless steel	• Clean stainless steel front and handles with non-abrasive soapy water and a dishcloth.
(Stainless Steel		Rinse with clean water and a soft cloth.
Models Only)	cleaners	• Use a non-abrasive stainless steel cleaner. These cleaners can be purchased at most home
		improvement or major department stores. Always follow manufacturer’s instruction. Do not

use household cleaners containing ammonia or bleach.

• NOTE: Always clean, wipe and dry with grain to prevent scratching.

• Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

Ice Chute Extension

Installing the Ice Chute Extension

The ice chute extension is designed to better direct ice flow into containers.

Removing the Ice Chute Extension For Cleaning

1 Turn the refrigerator off using the button on the control panel (refer to Owner’s Manual).

2Align the extension with the ice chute so that the snap clips are just inside the front edge of the chute.

3Push upward until the extension snaps into place.

Push Upward Until The Extension Snaps In Place

1Turn the refrigerator off using the button on the control panel

(refer to Owner’s Manual).

4Turn your refrigerator back on.

2Press inward firmly on the front of the chute and pull down.

3Turn your refrigerator back on.

Press Here

Firmly

Pull Down